#
# This is the configuration file for the LDAP nameservice
# switch library and the LDAP PAM module.
#

# Your LDAP server. Must be resolvable without using LDAP.
# Multiple hosts may be specified, each separated by a
# space. How long nss_ldap takes to failover depends on
# whether your LDAP client library supports configurable
# network or connect timeouts (see bind_timelimit).
host 127.0.0.1

# The distinguished name of the search base.
base dc=prudent,dc=taliesyn

# The search scope.
#scope sub
#scope one
#scope base

# Reconnect policy:
#  hard_open: reconnect to DSA with exponential backoff if
#             opening connection failed
#  hard_init: reconnect to DSA with exponential backoff if
#             initializing connection failed
#  hard:      alias for hard_open
#  soft:      return immediately on server failure
bind_policy soft

# Connection policy:
#  persist:   DSA connections are kept open (default)
#  oneshot:   DSA connections destroyed after request
#nss_connect_policy persist

# Idle timelimit; client will close connections
# (nss_ldap only) if the server has not been contacted
# for the number of seconds specified below.
#idle_timelimit 3600

# Filter to AND with uid=%s
#pam_filter objectclass=account

# The user ID attribute (defaults to uid)
#pam_login_attribute uid
#pam_login_attribute uidNumber

# Search the root DSE for the password policy (works
# with Netscape Directory Server). Make use of
# Password Policy LDAP Control (as in OpenLDAP)
pam_lookup_policy yes

# returns NOTFOUND if nss_ldap's initgroups() is called
# for users specified in nss_initgroups_ignoreusers
# (comma separated)
nss_initgroups_ignoreusers root,ldap

# Enable support for RFC2307bis (distinguished names in group
# members)
nss_schema rfc2307bis

# RFC2307bis naming contexts
# Syntax:
# nss_base_XXX          base?scope?filter
# where scope is {base,one,sub}
# and filter is a filter to be &'d with the
# default filter.
# You can omit the suffix eg:
# nss_base_passwd       ou=People,
# to append the default base DN but this
# may incur a small performance impact.
#nss_base_passwd          dc=prudence,dc=taliesyn?(&(uidNumber>=100)(|(ou=Users)(ou=Machines)))
#nss_base_passwd          dc=prudence,dc=taliesyn?&(gidNumber=1081)(gidNumber=1307)
nss_base_passwd   ou=Computers,dc=prudence,dc=taliesyn?uidNumber>=100
nss_base_passwd   ou=Users,dc=prudence,dc=taliesyn?uidNumber>=100
nss_base_group          ou=Groups,dc=prudence,dc=taliesyn?uidNumber>=100
#nss_base_shadow        ou=People,dc=prudence,dc=taliesyn
#nss_base_hosts         ou=Hosts,dc=example,dc=com?one
#nss_base_services      ou=Services,dc=example,dc=com?one
#nss_base_networks      ou=Networks,dc=example,dc=com?one
#nss_base_protocols     ou=Protocols,dc=example,dc=com?one
#nss_base_rpc           ou=Rpc,dc=example,dc=com?one
#nss_base_ethers        ou=Ethers,dc=example,dc=com?one
#nss_base_netmasks      ou=Networks,dc=example,dc=com?ne
#nss_base_bootparams    ou=Ethers,dc=example,dc=com?one
#nss_base_aliases       ou=Aliases,dc=example,dc=com?one
#nss_base_netgroup      ou=Netgroup,dc=example,dc=com?one

# attribute/objectclass mapping
# Syntax:
#nss_map_attribute      rfc2307attribute        mapped_attribute
#nss_map_objectclass    rfc2307objectclass      mapped_objectclass

# configure --enable-nds is no longer supported.
# NDS mappings
nss_map_attribute uniqueMember member

# RFC 2307 (AD) mappings
#nss_map_objectclass posixAccount user
#nss_map_objectclass shadowAccount user
#nss_map_attribute uid sAMAccountName
#nss_map_attribute homeDirectory unixHomeDirectory
#nss_map_attribute shadowLastChange pwdLastSet
#nss_map_objectclass posixGroup group
#nss_map_attribute uniqueMember member
#pam_login_attribute sAMAccountName
#pam_password ad

# OpenLDAP SSL mechanism
# start_tls mechanism uses the normal LDAP port, LDAPS typically 636
# FIXME
#ssl start_tls
#ssl on

# OpenLDAP SSL options
# Require and verify server certificate (yes/no)
# Default is to use libldap's default behavior, which can be configured in
# /etc/openldap/ldap.conf using the TLS_REQCERT setting.  The default for
# OpenLDAP 2.0 and earlier is "no", for 2.1 and later is "yes".
#tls_checkpeer yes

# CA certificates for server certificate verification
# At least one of these are required if tls_checkpeer is "yes"
#tls_cacertfile /etc/ssl/ca.cert
#tls_cacertdir /etc/ssl/certs

# SSL cipher suite
# See man ciphers for syntax
#tls_ciphers TLSv1

# Disable SASL security layers. This is needed for AD.
#sasl_secprops maxssf=0

# Override the default Kerberos ticket cache location.
#krb5_ccname FILE:/etc/.ldapcache